2022-04-29 by hqt
The effect of UV-C radiation is to kill or prevent the multiplication of microorganisms. The Pulsed light Germ-killing Robots use this phenomenon to effectively eliminate pathogens on surfaces especially in clinics.
Cleaning aims to remove unwanted mineral and organic substances, such as dirt, dust and grease. Generally this process is 80% effective in disinfection.
Disinfection itself reduces microorganisms from a given surface. According to studies, it eliminates up to 99% of the microbial load.
And finally, sterilization being the most efficient, it reaches 100% in the elimination, applied in medicinal materials and utensils. Cleaning and disinfection tend to be terms most used in environments and surfaces.
It is a fact that we spend most of our time inside environments such as home and work. Understanding the difference between cleaning and disinfection is important. Disinfection is very important for them to be carried out efficiently and constantly.
Disinfection vs Manual Cleaning
The practice of disinfection, cleaning and also sterilization brings several benefits, both for heritage conservation and for the aesthetics of the environment and to ensure the health, well-being and safety of all residents, employees and customers.
However, cleaning the places well requires knowledge to correctly choose the products, techniques and frequency that each dirt and environment require. Thus, you can effectively fight microorganisms harmful to health, such as Covid-19 for example, among many other types of diseases that manifest themselves in the absence of adequate cleaning.
Just as there is a difference in dirt, there is also a difference between cleaning, disinfection and sterilization. In general, the three processes can promote the elimination of dirt, viruses and bacteria, but each one in a different percentage and effectiveness. Stay with us to understand even more! If you wish, you can browse between topics!
Disinfection Robots Mechanism
Pulsed light Germ-killing Robots for disinfection are designed to maintain microbiological purity in rooms where there is an increased risk of pathogens, and where it is necessary to maintain sterility. When a cell is exposed to UV-C radiation, the process of chemically altering DNA and RNA begins. It prevents the cell from reproducing and preventing reproductive organisms from causing disease and harmful processes.
We should remember that there is a risk of microbes escaping (caused by uneven exposure to light) and the risk of their reconstruction in the event of too low a dose of UV radiation. To be sure that the Pulsed light Germ-killing Robots will be effective, follow the manufacturer’s recommendations regarding the method and time of exposure.
UV disinfection and the coronavirus
The World Health Organization confirms that UV-C radiation is effective in the fight against the SARS-CoV-2 coronavirus. This causes the COVID-19 disease. The virus has a thin fatty layer that is susceptible to detergents, soaps, disinfectants, and ultraviolet radiation.
Who do we recommend Pulsed light Germ-killing Robots to?
Exposure to UV-C radiation is an effective and reliable method of disinfecting rooms, surfaces and objects. We recommend them especially where there are a lot of people and there is an increased risk of disease transmission, as well as to places where it is necessary to maintain sterility.
In addition to such obvious locations as: hospitals, operating rooms or doctor’s offices, the UV lamp will be a good solution for:
- SPA salons
- physiotherapeutic offices
- beauty and hairdressing salons, restaurants
- service and commercial facilities
- public toilets
Many other places where we want to provide our employees, guests and customers with microbiological purity.
Why is Pulsed light Germ-killing Robots worth it?
- The effectiveness of killing at the level of 99.99%, confirmed by research
- Safe for health in the flow operation mode
- Constant operation of the device in the presence of people minimizes the risk of infection
- The area of
effective operation with full-spectrum disinfection UV 200nm-315nm - Ability to disinfect surfaces in direct mode up to 3 meters in 5 minutes
- Simple automatic operation
- Can be placed anywhere
- Widely used in many industries, also outside medicine
The principle of operation of Pulsed light Germ-killing Robots
The technology of Pulsed light Germ-killing Robots comes on a closed chamber in which a UV-C lamp with a power suitable for disinfection is placed. The internal flow is slow enough to expose pathogens to radiation, achieving a lethal efficacy of 99.99% for bacteria and viruses. The air releases back into the room.
Research on the effectiveness of UV C radiation
The spectrum of activity includes:
- Bacteria
- Mushrooms
- Molds
- viruses
It is important to follow Pulsed light Germ-killing Robots instructions. The Sars-Cov-2 virus (COVID-19) is inactivated after just 6 seconds of exposure. We can easily use these robots to disinfect surfaces during the coronavirus epidemic.
Functional advantages of Pulsed light Germ-killing Robots
In addition to the robot itself, customers may be intrigued by the safety certificate attached to each product. We can use these robots in populated areas. In addition, these robots cover a lot of industries which require day to day disinfection.
They provide a sense of security for employees, customers, contractors or patients is very important. It is of particular importance in cases of severe disease.
Disinfection robots are a universal solution to fight viruses and bacteria. Recommended for use in places where people from various environments gather.
Disinfection Robots in various industries – Application
The use of Pulsed light Germ-killing Robots is particularly wide in the era of a pandemic. Nevertheless, they can be successfully used outside the epidemic in medical centers and offices, as well as in workplaces.
Medical industry
- UV-C robots are often good to use to disinfect the air in hospitals
- We recommend using Xenon Uv germ killing robot, because direct UV-C radiation allows for surface disinfection
- The high safety of patients and staff can be achieved not only with the help of traditional disinfection methods, but also supported by the constant disinfection of the air with the help of a disinfection robot.
- A direct-acting radiator disinfects surfaces at a distance of up to 3 meters, within 5 minutes.
Disinfection Robots Installation in the fight against nosocomial infection
Offices, public places
Pulsed light Germ-killing Robots are particularly popular. It allows disinfecting air and surfaces. The flow mode is on constantly and works in the presence of people, while the direct mode is used periodically for surface disinfection.
